Super Cub Rev-2 Base components
* Fuselage-completely welded (bare 4130 tube)
– Right Side split style door.
– Swing up window w/gas cyls. (F&B)
– Door latch assembly.
– Attachment points for seat belt & shoulder harness
* Front & Rear Controls
– Sticks, Rudder pedals & Toe Brakes.
– Rear controls are removable.
* Torque tube & torque tube bearings.
* Flap Lever Assembly
* Rear Trim Electric Actuator.
– String Pot
* Windshield (Clear Lexan)
– 1 Clear uncut Sheet for Top Glass – .0125
– 1 Clear uncut Sheet for Side windows – .80
– Exterior Windshield Trim Strip.
– Front door post interior covers.
* Motor Mount (Conical)
– Engine mount saddles (Tip Out).
* Large baggage compartment w/door frame.
– Lock & Striker plate.
* Adjustable Front Seat Assembly (No upholstery)
– Back & bottom skins.
– Nylon slides
* Rear Seat Assembly (No upholstery)
– Back & bottoms skins
* Composite Engine & Boot Cowls
* Carbon Fiber Floor & Side Panels up to side former
* Aluminum Firewall
– Can be painted with fireproof paint. Aircraft Spruce #05-02615
* Blank Aluminum Instrument Panel
* Rear Tail bottom aluminum inspection cover
* Interior wing roof panels (L&R)
* All Cables & Pulleys
* Hardware Kit for fuselage assembly
– (Bolts, washers, nuts & clevis pins only, no nut plates or screws)
* Wing Assembly (L&R) w/spar doublers
– Flaps (Completely Assembled)
– Ailerons (Completely Assembled)
– Leading Edge Slat Kit w/hardware
– Horner Style composite tips
– 24 Gallon wing tanks (L&R)(48 Gal capacity)
– HD sealed wing struts w/forks
– Jury Struts
– Stainless steel tie down rings
– Flap gap seal
* Tail Assembly
– Elevators (Ready to Cover)
– Stabilizers (Ready to Cover)
– Rudder (Ready to Cover)
– Flying wires and bushings
* Landing Gear (L&R)
– 1 1/2″ Axles
– Axple Spacers
– Axle Nuts
– Cabane V
– 6″ Double Puck wheels and brakes
– Matco 11″ Tail Wheel
– Tail Wheel Spring
* No Shock Struts included (See Options)