Stewart Systems EkoEtch Aluminum Etch
EkoEtch is a high concentrate combination acid based detergent and de-greaser. EkoEtch removes scale, corrosion, light oil, processing fluids, and brightens aluminum.
EkoEtch is non-hazardous, water reducible, and nonflammable.
Use EkoEtch to prepare both new and old aluminum surfaces before applying AFS primer/sealer or EkoPrime primer/sealer.
 32 KB |
Stewart Systems EkoClean Heavy Duty Cleaner
EkoClean is non-butyl, water soluble liquid detergent concentrated de-greaser and all purpose cleaner. It provides a triple effect for most cleaning.
EkoClean uses a combination of detergents that work synergistically to remove dirt and grime. EkoClean attacks both petroleum and food greases aggressively. EkoClean contains a power ordor neutralizer. Use it diluted or full strength to clean polyester/dacron fabric, metal, and composites.
EkoClean is nonhazardous and nonflammable. Use EkoClean before applying EkoEtch.
|
143 KB |
High Quality Water Based Primer Sealer
Stewart Systems Primer Sealer is a high quality, single component primer, not requiring any catalyzing agent. Performance obtained is equal or superior to that of two-component, catalyzed epoxy systems. PRIMER SEALER offers good coverage, excellent durability, and ease of application, as well as being a low VOC and EPA compliant coating.Environmental Advantage
It is a low VOC (Volatile Organic Compound). high performance production coating. It is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be flocculated; dried and sent to a "Class B" landfill. Check with your local and state regulations for proper handling.Characteristics
Excellent exterior durability Excellent hardness/impact resistance Excellent mar and abrasion resistance Excellent adhesion on plastics, gelcoat and composite substrates Solvent resistant Can be applied in a wide variety of temperature and humidity conditions without the use of retarders Distilled water is used for reduction Water is used for clean-up Non-Hazardous Air dry or force curing preferred Can be oven baked Wide range of colors to promote topcoat coverage Coating will not flash rust on bare metal Shelf life of 1+ years Unused paint can be returned to container. Non-Flammable.
|
36 KB |
Stewart Systems EkoCoat 1 Part
Interior topcoat that is pre catalyzed. EkoCoat is ready to use right out of the bottle and can be applied with a brush, roller, or spray gun.
EkoCoat is an excellent, easy to use choice for interior substrates over Stewart Systems Primer/Sealer. Water reducible, unused EkoCoat can be returned to the bottle for future use. Available in all our standard colors, EkoCoat is non-hazardous and non-flammable.
|
43 KB |
EkoPoly
EkoPoly is a versatile high performance true polyurethane top coat for metal, composite and fabric surfaces. Eko Poly provides a glossy, flexible, and durable top coat that retains it's flexibility and gloss finish under the most adverse conditions. EkoPoly is resistant to fuels, oils, and solvents.
|
560 KB |
|
10 KB |
Evershield Protective Coating
Youll be amazed at this sprayable, wipeable, dippable thin, clear liquid that cures to an almost impregnable coating.
EverShield's protective properties boggle the mind. Examples: In tests it resists blow-torch heat (yes, blow-torch flame) above 2000°F It is impervious to virtually any chemical. It is excellent for hardness, flexibility, impact and scratch resistance, adhesion, and corrosion protection. It is unbelievably slick.
On any aircraft, EverShield has applications from nose cone to tail cone. Wiped on a prop, this incredible film sheds bugs, pebbles, salt spray, whatever. On an exhaust, it seals the metal from corrosion and by refraction reduces heat transmissions to cowling and elsewhere. On leading edges bugs slide off. Over the entire plane, the slick surface fortifies the boundary layer, reduces drag. (How many knots will your plane pick up with an EverShield finish?)
EverShield is a catalyzed treatment system that has been called liquid glass by some, liquid ceramic by others. It is non-hazardous (like all SS products). Cleans up with water (or solvents). Grips most any surface, from stainless steel, to plexiglass, to paint.
Because this thin liquid covers so much surface per gram, the cost per square foot is trivial.
EverShield is a true breakthrough miracle coating. There's nothing comparable available. Once you use it you'll continue to find a myriad of applications. Better give it a try soon.
|
158 KB |
| < Prev |
|---|
